Recover emails from multiple drives or disks
Click "Batch Recovery" tab in the dialog, you can recover emails from a batch of drives or disks:
1.Click "Add Drive/Disk", a dialog will popup, where you can select a drive or disk to be scanned, as well as the output folder, then click "OK" in the popup dialog to add these information to the "List of drives or disks to be recovered" list. The initial recovery status is "Not Recovered". TO PREVENT OVERWRITING YOUR OUTLOOK EXPRESS DATA ON THE SOURCE DRIVE OR DISK, PLEASE DO NOT SELECT AN OUTPUT FOLDER ON THE SOURCE DRIVE OR DISK.
2.Click "Remove Selected" can remove the selected drives and disks in the list.
3.Click "Remove All" can clear the list.
4.After the drives and disks to be scanned and recovered have been added into the list, click "Start Recovery" to recover all the drives and disks in the list one by one. After emails in one drive or disk have been recovered successfully, its status will change to "Successfully". Otherwise, its status will become "Failed". You can also click "Stop Recovery" button to abort the recovery process. In that case, the recovery status of the drive or disk will become "Aborted".
Note:
•AS SOON AS THE DATA DISASTER HAPPENS ON YOUR OUTLOOK EXPRESS DATA LOCATED IN THE SOURCE DRIVE OR DISK, PLEASE DO NOT WRITE OR CHANGE ANY DATA ON THAT DRIVE OR DISK. DOEDR WILL ONLY READ DATA FROM THAT DRIVE OR DISK AND WILL NEVER WRITE OR CHANGE ANY DATA ON IT!
•TO PREVENT OVERWRITING YOUR OUTLOOK EXPRESS DATA ON THE SOURCE DRIVE OR DISK, PLEASE DO NOT SELECT AN OUTPUT FOLDER ON THE SOURCE DRIVE OR DISK.
•If you are using a demo version of DOEDR, then it will only recover the first 10 messages, with all the remaining messages replaced with a brief demo information. In addition, you will see a messagebox after the recovery process, where you can click the "Show Recovery Report" button and see a report of all the recoverable messages in the drives or disks. Please order the full version to get all the recoverable emails.
