chifukwa DataNumen DWG Recovery?

# 1 Kubwezeretsa
mlingo

Miliyoni 10+
ogwiritsa

Zaka 20+ za
zinachitikira

Kukhutira 100%
Chitsimikizo

Pezani Zambiri Kuposa Otsutsana Nathu

Kubwezeretsa ndi most muyezo wofunikira wa DWG mankhwala ochira. Kutengera kuyesa kwathu kwathunthu, DataNumen DWG Recovery ali bwino kuchira, bwino kwambiri kuposa omwe akupikisana nawo pamsika!

Avereji Yoyeserera

kuyerekezera Tchati

Phunzirani zambiri za momwe mungachitire DataNumen DWG Recovery amasuta mpikisano

Chiyankhulo Chosavuta Kwambiri

chithunzi

kuchira

chithunzi

Kubwezeretsa Gulu

chithunzi

Zosintha

Njira Yothetsera Kutsata Zolakwitsa za AutoCAD Chifukwa chachinyengo DWG owona

zothetsera
Kusaka kwaulere100% Otetezeka
Gulani pompanoChitsimikizo Chokhutira cha 100%

Zinthu Zazikulu mu DataNumen DWG Recovery v3.0

  • Thandizo la Windows 95/98 / ME / NT / 2000 / XP / Visa / 7/8 / 8.1 / 10 ndi Windows Server 2003/2008/2012/2016/2019.
  • Thandizo kuti mupezenso AutoCAD R14 mpaka 2021 DWG Mafayilo.
  • Chithandizo chobwezera zinthu zotsatirazi mu DWG mafayilo: BLOCK, POINT, LINE, ARC, CIRCLE, ELLIPSE, SPLINE, XLINE, RAY, SOLID, 3DFACE, LWPOLYLINE, POLYLINE (2D), POLYLINE (3D), POLYLINE (PFACE), POLYLINE (MESH), VERTEX (2D) , VERTEX (3D), VERTEX (MESH), VERTEX (PFACE), VERTEX (PFACE FACE), TEXT, MTEXT, TRACE, ATTRIB, ATTDEF, ENDBLK, SEQEND, INSERT, DIMENSION (ORDINATE), DIMENSION (LINEAR), DIMENSION YOPHUNZITSIDWA), DIMENSION (ANG 3-Pt), DIMENSION (ANG 2-Ln), DIMENSION (RADIUS), DIMENSION (DIAMETER), LEADER, TOLERANCE, BLOCK CONTROL OBJ, BLOCK HEADER, LAYER CONTROL OBJ, LAYER OBULA STYLE, LTYPE CONTROL OBJ, LTYPE, ONANI ZOTHANDIZA OBJ, VIEW, UCS CONTROL OBJ, UCS, VPORT CONTROL OBJ, VPORT, APPID CONTROL OBJ, APPID, DIMSTYLE CONTROL OBJ, DIMSTYLE.
  • Chithandizo chobwezera lost & tapeza zinthu mu DWG Mafayilo.
  • Thandizo kuti mubwezeretse zinthu zochotsedwa mu DWG Mafayilo.
  • Thandizo kuti mubwezere DWG kujambula kuchokera kutemporary mafayilo pakagwa tsoka.
  • Kuthandizira kutulutsa mafayilo osasintha mu DWG format ndi mtundu wa DXF.
  • Kuthandizira kutulutsa mafayilo okhazikika mu mtundu wa AutoCAD R14 mpaka 2017.
  • Thandizo lokonzanso DWG mafayilo pazosokoneza, monga ma diski, Zip ma disks, ma CDROM, ndi zina zambiri.
  • Thandizo lokonzanso mkanda wa DWG Mafayilo.
  • Thandizo kuti mupeze ndikusankha fayilo ya DWG mafayilo oti akonzedwe pakompyuta yakomweko.
  • Thandizani kuphatikiza ndi Windows Explorer, kuti muthe kukonza AutoCAD DWG fayilo yokhala ndi mndandanda wazenera wa Windows Explorer mosavuta.
  • Thandizani kukoka & kugwetsa ntchito.
  • Ma mzere wa mzere wothandizira (DOS prompt) magawo.
Kusaka kwaulere100% Otetezeka
Gulani pompanoChitsimikizo Chokhutira cha 100%

kugwiritsa DataNumen DWG Recovery Kuti Mubwezeretse AutoCAD Yachinyengo DWG owona

Onani Phunziro la Kanema (Mtundu Wathunthu)
Onani Phunziro la Kanema (Mtundu Wowonetsera)

Pamene AutoCAD yanu DWG mafayilo ndi owonongeka kapena owonongeka ndipo simungathe kuwatsegula mwachizolowezi, mutha kugwiritsa ntchito DataNumen DWG Recovery kuti muwone DWG mafayilo ndikubwezeretsa zochuluka kuchokera kwa iwo momwe zingathere.

Start DataNumen DWG Recovery.

DataNumen DWG Recovery

Zindikirani: Musanalandire chilichonse chowonongeka kapena chowonongeka dwg mafayilo ndi DataNumen DWG Recovery, chonde tsekani mapulogalamu ena aliwonse omwe angasinthe fayilo ya dwg Mafayilo.

Sankhani owonongeka kapena owonongeka dwg fayilo kuti ibwezeretsedwe:

Sankhani Gwero File

Mutha kuyika dwg fayilo mwachindunji kapena dinani fayilo ya Wonani batani kuti musakatule ndikusankha fayilo. Muthanso kudina fayilo ya Pezani batani kuti mupeze fayilo ya dwg fayilo kuti ibwezeretsedwe pakompyuta yakomweko.

Ngati mukudziwa mtundu wa gwero lowonongeka DWG file, ndiye mutha kuyiyika mubokosi losakanikirana: Sankhani Mtundu Wopanga Mafayilo

Mwachikhazikitso, idakhazikitsidwa ku "Auto Determined", zomwe zikutanthauza DataNumen DWG Recovery idzasanthula ndikuzindikira mtundu wake zokha.

Pakadali pano mafomu otsatirawa akuthandizidwa kuti atuluke DWG mafayilo:

Magulu a AutoCAD 2013-2017 DWG mtundu
Magulu a AutoCAD 2010-2012 DWG mtundu
Magulu a AutoCAD 2007-2009 DWG mtundu
Magulu a AutoCAD 2004-2006 DWG mtundu
Magulu a AutoCAD 2000-2003 DWG mtundu
AutoCAD R14 DWG mtundu

Mwachinsinsi, DataNumen DWG Recovery adzapulumutsa lokhazikika dwg fayizani fayilo yatsopano yotchedwa xxxx_fixed.dwg, pomwe xxxx ndi dzina la komwe adachokera dwg fayilo. Mwachitsanzo, kwa source dwg fayilo Yowonongeka.dwg, dzina losasinthika la fayilo lokhazikika lidzawonongeka_fixed.dwg. Ngati mukufuna kugwiritsa ntchito dzina lina, chonde sankhani kapena kuliyika molingana:

Sankhani Fayilo Yopita

Mutha kulowetsa dzina lokhazikika la fayilo mwachindunji kapena dinani Wonani batani kuti musakatule ndikusankha fayilo yokhazikika.

Ngati fayilo yokhazikika ili ndi.DWG kuwonjezera, ndiye DataNumen DWG Recovery adzautulutsa DWG mawonekedwe.

Ngati fayilo yotulutsa fayilo ili ndi .DXF yowonjezera, ndiye DataNumen DWG Recovery adzautulutsa mu mtundu wa DXF.

Mutha kutchula mtundu wa mafayilo omwe atulutsidwa m'bokosi la combo: Sankhani Fayilo Yakopita

Mwachinsinsi, ngati simukufotokoza mtundu wa fayilo, ndiye DataNumen DWG Recovery idzagwiritsa ntchito mtundu womwewo monga gwero DWG kupala.

Pakadali pano mitundu yotsatirayi ikuthandizidwa:

Magulu a AutoCAD 2013-2017 DWG mtundu
Magulu a AutoCAD 2010-2012 DWG mtundu
Magulu a AutoCAD 2007-2009 DWG mtundu
Magulu a AutoCAD 2004-2006 DWG mtundu
Magulu a AutoCAD 2000-2003 DWG mtundu
AutoCAD R14 DWG mtundu

Dinani Start Kubwezeretsa batani, ndi DataNumen DWG Recovery chifuniro start kusanthula ndikupezanso gwero dwg fayilo. Bwalo lopita patsogolo

Babu Lopita Patsogolo

ziwonetsa kupita patsogolo.

Pambuyo pochira, ngati gwero dwg fayilo ikhoza kubwezeredwa bwino, muwona bokosi la uthenga ngati ili:

Bokosi la Mauthenga Abwino

Tsopano mutha kutsegula zolimba dwg fayilo ndi AutoCAD kapena zina dwg zofunikira.

zambiri

NkhaniNkhani
FAQFAQ
Zolemba ZothandiziraZolemba Zothandizira

DataNumen DWG Recovery 3.0 imatulutsidwa pa Meyi 3, 2021

  • Thandizani zinenero zambiri mu GUI.
  • Thandizani Spanish, French, Germany, Italian, Portuguese, Russian, Japan, Korea and Chinese Simplified.
  • Konzani nsikidzi zazing'ono.

DataNumen DWG Recovery 2.1 imatulutsidwa pa Disembala 16, 2020

  • Onetsetsani zosintha zamagetsi.
  • Sinthani magalimoto kukhala mtundu waposachedwa.
  • Konzani nsikidzi zazing'ono.

DataNumen DWG Recovery 1.9 imatulutsidwa Novembala 4th, 2020

  • Sinthani kuchuluka kwa kuchira.
  • Konzani nsikidzi zazing'ono.

DataNumen DWG Recovery 1.8 imatulutsidwa pa Juni 30, 2020

  • Thandizo kuti mubwezeretse AutoCAD 2018 mpaka 2021 DWG Mafayilo.
  • Konzani nsikidzi zazing'ono.

DataNumen DWG Recovery 1.7 imatulutsidwa Novembala 19th, 2019

  • Sinthani makina obwezeretsa batch.
  • Support kupulumutsa mtanda kuchira chipika.
  • Konzani nsikidzi zazing'ono.

DataNumen DWG Recovery 1.6 imatulutsidwa pa Epulo 19th, 2018

  • Thandizo kuti mubwezeretse AutoCAD 2015 mpaka 2017 DWG Mafayilo.
  • Konzani nsikidzi zazing'ono.

DataNumen DWG Recovery 1.5 imatulutsidwa pa Meyi 29, 2014

  • Thandizo kuti mupezenso AutoCAD R14 mpaka 2003 DWG Mafayilo.
  • Konzani nsikidzi.

DataNumen DWG Recovery 1.1 imatulutsidwa pa Marichi 31, 2014

  • Thandizo kuti mubwezeretse AutoCAD 2004 mpaka 2006 DWG Mafayilo.
  • Konzani nsikidzi.

DataNumen DWG Recovery 1.0 imatulutsidwa pa Januware 7, 2014

  • Thandizo kuti mubwezeretse AutoCAD 2010 mpaka 2014 DWG Mafayilo.
  • Chithandizo chobwezera zinthu zotsatirazi mu DWG mafayilo: BLOCK, POINT, LINE, ARC, CIRCLE, ELLIPSE, SPLINE, XLINE, RAY, SOLID, 3DFACE, LWPOLYLINE, POLYLINE (2D), POLYLINE (3D), POLYLINE (PFACE), POLYLINE (MESH), VERTEX (2D) , VERTEX (3D), VERTEX (MESH), VERTEX (PFACE), VERTEX (PFACE FACE), TEXT, MTEXT, TRACE, ATTRIB, ATTDEF, ENDBLK, SEQEND, INSERT, DIMENSION (ORDINATE), DIMENSION (LINEAR), DIMENSION YOPHUNZITSIDWA), DIMENSION (ANG 3-Pt), DIMENSION (ANG 2-Ln), DIMENSION (RADIUS), DIMENSION (DIAMETER), LEADER, TOLERANCE, BLOCK CONTROL OBJ, BLOCK HEADER, LAYER CONTROL OBJ, LAYER OBULA STYLE, LTYPE CONTROL OBJ, LTYPE, ONANI ZOTHANDIZA OBJ, VIEW, UCS CONTROL OBJ, UCS, VPORT CONTROL OBJ, VPORT, APPID CONTROL OBJ, APPID, DIMSTYLE CONTROL OBJ, DIMSTYLE
  • Chithandizo chobwezera lost & tapeza zinthu mu DWG Mafayilo.
  • Thandizo kuti mubwezeretse zinthu zochotsedwa mu DWG Mafayilo.
  • Kuthandizira kutulutsa mafayilo osasintha mu DWG format ndi mtundu wa DXF.
  • Zothandizira kutulutsa mafayilo okhazikika mu AutoCAD R2.5, R2.6, R9, R10, R11, R12, R13, R14, 2000 mpaka 2014.
  • Thandizo lokonzanso DWG mafayilo pazosokoneza, monga ma diski, Zip ma disks, ma CDROM, ndi zina zambiri.
  • Thandizo lokonzanso mkanda wa DWG Mafayilo.
  • Thandizo kuti mupeze ndikusankha fayilo ya DWG mafayilo oti akonzedwe pakompyuta yakomweko.
  • Kuthandizira kuphatikiza ndi Windows Explorer, kuti muthe kukonza Outlook DWG fayilo yokhala ndi mndandanda wazenera wa Windows Explorer mosavuta.
  • Thandizani kukoka & kugwetsa ntchito.
  • Ma mzere wa mzere wothandizira (DOS prompt) magawo.

Zamgululi Related

DataNumen PSD Repair Kujambula bokosi

DataNumen PSD Repair

Konzani ndikubwezeretsanso chithunzi choipa cha Photoshop (PSD, PDD) mafayilo.

tsatanetsatane
DataNumen PDF Repair Kujambula bokosi

DataNumen PDF Repair

Konzani ndikuchotsanso Acrobat wachinyengo PDF Mafayilo.

tsatanetsatane