4 Solutions to “The file is too large for the destination file system” Issue in Windows

You may receive the message – “The file is too large for the destination file system” when you attempt to copy a file to an external drive. In this article, we will focus on this issue to provide you with 4 effective solutions.

Have you ever received the message – “The file is too large for the destination file system” when you copy or move a file to a drive? As it suggests, this problem is exactly involved with the file system of destination drive.

"The file is too large for the destination file system"

File system controls how files are stored, identified and organized in the drive. In Windows, the most common file systems are FAT, FAT32, and NTFS. FAT, known as FAT16, only supports an individual file up to 2GB in maximum size. For FAT32, the supported maximum size of a single file is 4GB. In comparison, for NTFS, the maximum size of a single file is increased to 16TB.

Based on mentioned above, “The file is too large for the destination file system” issue results from the limit of maximum size of the destination drive file system. Hence, you can check your drive file system. Most of time, it may be either FAT or FAT32. Then, what you can do is to convert file system to NTFS. Here are 4 ways to get it. But, you have to back up drive at first. Otherwise, you will be required to attempt data recovery afterwards, similar to PST recovery.

1. Reformat in Windows Explorer

  • First off, go to “Start Menu” and click “Computer”.
  • Then, in Windows Explorer, locate and pitch on the destination drive.
  • Next, right click and choose “Format” from the context menu.
  • After that, in the popup dialog box, select “NTFS” in “File System” field.
  • Finally, click “Start” button.

2. Reformat in Disk Management

  • At first, press “Win” + “R” to bring up “Run” dialog box.
  • Then, input the “diskmgmt.msc” in the “Open” field and press “Enter” key.
  • Subsequently, in “Disk Management” window, locate the destination drive.
  • Later, right click it and choose “Format” option.
  • In the small popup dialog box, choose “NTFS” in “File System” box.
  • Ultimately, click “OK”.

3. Change File System in Command Prompt

  • For a start, trigger “Run” like the Step 1 in the above way.
  • Then, type “cmd” and press “Enter” key button.
  • Next, in the displayed Command Prompt window, input the following line:
convert drive letter: /fs: file system

For instance, you want to convert Drive F to NTFS file system, use:

convert F: /fs: ntfs
  • Eventually, press “Enter” button.
  • Now, just wait convert.exe to complete the process.

4. Convert File System by Third Party Tool

Aside from the inbuilt methods provided by Windows, you could resort to a third party tool as well. There are a plenty of tools for file system conversion in today’s market. Any the unreliable may make irreversible damage to both drive and data. Therefore, you should choose a trustworthy, experienced and well-known tool to have a try.

Author Introduction:

Shirley Zhang is a data recovery expert in DataNumen, Inc., which is the world leader in data recovery technologies, including corrupt mdf and outlook repair software products. For more information visit www.datanumen.com

6 responses to “4 Solutions to “The file is too large for the destination file system” Issue in Windows”

  1. Windows 10 Command Prompt wants it formatted this way:
    “convert.exe F:/ fs:ntfs”

    ie. needs the “.exe” added, and the extra space before “nfts” removed.

  2. I found a work around for this issue.
    1.) Take the giant ‘ file is too large for destination file system’ file and compress it.
    2.) Extract your newly compressed file, make the unzip destination wherever you originally wanted to drop you ‘too large file’. It’ll soar across in little bits, a happy as a clam.

Leave a Reply

Your email address will not be published. Required fields are marked *